Clik here to view.
UDP Streaming with a router in the middle
@Aleixo wrote: Hi, How i can streaming in a UDP with a router in the middle, without using a VPN, only portforwarding between local, remote router, microPMU and PC. I used a VPN to connect LAN-LAN and...
View ArticleClik here to view.
PMU Simulator IEC 61850-90-5
@saeed wrote: Hello everyone, I am trying to write a PMU simulator that generates random DataFrame bases on “IEC 61850-90-5” Standards in order to test it with OpenPDC. However, i haven’t be able to...
View ArticleLoading PMU data stored in .D2 file format
@ganti94 wrote: I have a PMU data file in .D2 format. I wanted to load this file into PMU connection tester and create a connection file and a configuration file. Can someone please describe the...
View ArticleAwaiting configuration frame
@Marianne_Guieb wrote: Hello all, When I run the PMU Connection Tester, the screen hangs on “Awaiting configuration frame…”. I’ve double checked the setup.ini file of the uPMU to ensure that I’ve used...
View ArticleHow use connection tester with a tesla?
@Mariano_Alvarez wrote: Hi everyone im new to this software, but im trying to understand , i have the next situation ; I have a tesla unit a “disturbances register,” in this unit i can configure a PMU...
View ArticleClik here to view.
Error message : '1 connection attempted'
Hello everybody. I try to connect, simulate my SIEMENS SIPROTEC 5 device and PMU Connection Tester. To demonstrate my device function (PMU), I think PMU Connection Tester is the best option. However,...
View ArticleClik here to view.
Frame rate, Data rate in Real-time: How to Store?
Hi all, I am sending synchrophasor data using a C37.118 python library. image796×720 258 KB I have managed to establish a connection and see the data in the GUI. I am changing the frames per second...
View ArticleCSV file to PMU connection tester
How to import our realtime data as a Csv file into PMU Connection tester directly to view and analyse the details further via direct visualisation 2 posts - 2 participants Read full topic
View ArticleClik here to view.
No connection could be made because the target machine actively refused it
I got a PSL microPMU device. After exploring the PMUConnectionTester, I ran into a problem that I tried for a while to solve but failed. Does anyone know how to solve it by any chance? The error...
View ArticleClik here to view.
Connection closed by remote device
Dear Sir, I have used PMU Connection Tester to check the connection for three PMUs. The connections establishes as shown in the screenshot A image1437×654 43.1 KB But after few seconds the connection...
View ArticleClik here to view.
Header Frame response not accepted
I am using testing my PMU using the test tool. I request Header Frame from PMU but the tool reacts in a manner I do not expect, Command “SendHeaderFrame” requested at 5/20/2021 10:22:43 PM Exception:...
View ArticleClik here to view.
Data Frames not recognized by PMU Tester
I believe I now have the CFG, HDR, and Transmission Enable/Disable commands working with sensible data being returned (perhaps with a tweak or two to come). Now I’m sending Data Frames to the PMU...
View ArticleLoading PMU connection directly to OSI-PI Hsitorian
Is there a way to load a .PmuConnection file directly into OSI-PI Historian? 3 posts - 3 participants Read full topic
View ArticleClik here to view.
I can not connet througth PMU connection tester neither OpenPDC
HI. I am generating a PMU with RT-LAB and i checked in mi pc with wireshark and it show me the synchrophasors but i can not connet with PMU connection tester or OpenPDC. In RT-LAB the PMU has...
View ArticleClik here to view.
PMU tester connection error
Hello, I was trying to connect the PMU tester with openPDC but couldn’t really connect once I defined the IP address and everything. Every time I try to connect, it says “no connection could be made...
View ArticleUnable to view output on PMU Connection Tester application and RT-Lab
I executed a model consisting of IEEE C37 Protocol and IEEE-39 bus system using RT-Lab and Simulink. The model is successfully executed in the software and I can view the output on Simulink. All the...
View ArticleClik here to view.
Having Problems connecting OPAL RT HYPERSIM with OPEN PDC Connection Tester
Dear Support Team, I hope that you are having a great day. My name is Hamza and i am currently working as a Student Research Assistant at Otto von Guericke Universität Magdeburg, Germany along with my...
View ArticlePhasor magnitude parsing not working with CFG-3 and integer format
I’m using PMU Connection Tester version 4.7.1 and my PMU is configured with the phasor format as Integer. When I use the 2011 protocol the CFG-3 frame is requested. The CFG-3 frame is sent by my...
View ArticleFrequency is not getting shown in the frequency chart
Hello all, I am trying to connect GTNET PMU in RTDS with the nominal frequency of 60 Hz. If I change the frequency in the RTDS simulation close to 60 Hz, the frequency is not shown in the graph....
View ArticleCommunicating with a C37.118.1a-2014 protocol device
Hi everyone! I’m trying to use PMU Connection Tester V4.7.4 to communicate with a PMU Unit, make Siemens Siprotec model 7SJ82. The device support C37.118.1a-2014 protocol version. Do you think it will...
View Article